Compression Spring (6mm ID x 8mm OD, 2.3kg Max Load, 16-25mm
This compression spring is able to slip over a 6mm shaft in order to apply tension between two parts riding on the same shaft. Alternatively, it can be inserted into an 8mm hole to apply a force to a shaft, rod, tube or dowel directly above it. Compression springs can be used to suppress abrupt forces, apply forces in the opposite direction or store energy such as in a trigger or latch assembly. Notice that the spring has a resting length, length at rated load and a length at full compression. The resting length is the length at zero load. The length at rated load is the length of the spring with the maximum amount of load the spring is recommended for, applied to it. The full compression length is measured if you were to load the spring to the point where the coils laid directly on top of one-another. We’ve found that this compression spring is able to be used in applications that push the spring to the full compression length time and time again without any memory or loss of spring tension.
150:1 Metal Gearmotor 37Dx57L mm 12V (Helical Pinion)
This compression spring is able to slip over a 6mm shaft in order to apply tension between two parts riding on the same shaft. Alternatively, it can
Compression Spring (6mm ID x 8mm OD, 2.3kg Max Load, 16-25mm Length) - 2 Pack
150:1 Metal Gearmotor 37Dx57L mm 24V (Helical Pinion)
4100 Series Aluminum Tube (8mm ID x 10mm OD, 300mm Length
4100 Series Aluminum Tube (8mm ID x 10mm OD, 100mm Length
4100 Series Aluminum Tube (8mm ID x 10mm OD, 300mm Length
8mm ID x 10mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly, or as a sleeve over an 8mm
4100 Series Aluminum Tube (8mm ID x 10mm OD, 300mm Length)
2910 Series Aluminum Clamping Collar (6mm ID x 19mm OD, 9mm Length
150:1 Metal Gearmotor 37Dx57L mm 24V (Helical Pinion)
Compression Spring (6mm ID x 8mm OD, 2.3kg Max Load, 16-25mm
4100 Series Aluminum Tube (8mm ID x 10mm OD, 100mm Length) - goBILDA®
This compression spring is able to slip over a 6mm shaft in order to apply tension between two parts riding on the same shaft. Alternatively, it can
Compression Spring (6mm ID x 8mm OD, 2.3kg Max Load, 16-25mm Length) - 2 Pack
2910 Series Aluminum Clamping Collar (6mm ID x 19mm OD, 9mm Length
150:1 Metal Gearmotor 37Dx57L mm 24V (Helical Pinion)
Compression Spring (6mm ID x 8mm OD, 2.3kg Max Load, 16-25mm
