159F-6-6 Dixon Valve Brass SAE 45 deg. Flare Fitting - 45 deg. Elbow - — HoseWarehouse

159F-6-6 Dixon Brass SAE 45 deg. Flare Fitting is a 45 deg. Elbow, and has a 3/8" Tube Size x 3/8" Pipe Size. The economical fitting resists mechanical pullout, and is manufactured especially for hard to hold liquids and gases.

Features:
Reference SAE 010302. Economical fitting resists mechanical pullout. Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection. Manufactured from CA 360, CA 345, or CA377 brass. Manufactured especially for hard-to-hold liquids and gases.
Specifications:
Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards). Temperature range: -65 deg. F to 250 deg. F Working Pressure Ranges: Temperature and type of tubing used are important factors, the table below is a good guide for proper selection. The PSI rating given is based on a temperature of 73 deg. F using copper tubing.
Assembly Instructions:
Cut tubing squarely and clean tube end thoroughly to remove burrs. Place nut onto tube. Place threaded end of nut toward end of tube. Flare tube end with flaring tool to provide 45 deg. flare. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal.

Working Pressure Ranges:

PSI	Tube OD	Tube Wall
1400	1/4	.030
1000	3/8	.032
750	1/2	.032
650	5/8	.035
550	3/4	.035

Part Number	Tube Size	Pipe Size	Straight Thread	PSI	Min/Max Temp	Material	Weight (Lbs)
159F-4-4	1/4	1/4	7/16-20	1400 (95.24 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.0700
159F-6-4	3/8	1/4	5/8-18	1000 (68.03 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.0950
159F-6-6	3/8	3/8	5/8-18	1000 (68.03 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.1000
159F-8-4	1/2	1/4	3/4-16	750 (51.02 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.1200
159F-8-6	1/2	3/8	3/4-16	750 (51.02 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.1250
159F-8-8	1/2	1/2	3/4-16	750 (51.02 bar)	-65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C)	Brass	0.2300

Technical Info: * Reusable Fitting Socket Data.PDF, Brass , Part Number , Hose Size, Thread, A, D, EØ, 4739-6B, -06, 5/8-18, 1.75, 0.89, 0.30,

4739-6B Aeroquip by Danfoss | Male SAE 45° Socketless Reusable Hose Fitting | -06 Male SAE 45° x -06 Push-On Hose Barb | Brass

Dixon 159F-8-6-pk5 SAE 45 Degree Elbow Flare Fitting 1/2 Tube, 3/8 Pipe, 3/4-16 Straight (Pack of 5): : Industrial & Scientific

SAE 45 Degree Flared Tube Fittings

SAE 45 Degree Flared Tube Fittings

45-degree elbow for connecting two tubes at an angle Flared tube connection on one end and male NPT connection on the other Brass for corrosion

Brass Flared Tube Fitting 45 Degree Forged Elbow SAE 45 Degree Flare 5/8 SAE Male x 1/2 NPT Male Pipe Thread Various Sizes 2pcs (5/8X1/2)

Company Info - Precision Performance

Rustark 5Pcs SAE Brass Flare Cap Tube Fitting Set 45 Degree Flare Cap Gas Line Cap Brass Hydraulic Fitting Set 1/2 1/4 3/8 5/8 5/16 OD : Industrial & Scientific

Technical Info: * Reusable Fitting Socket Data.PDF, Brass , Part Number , Hose Size, Thread, A, D, EØ, 4739-6B, -06, 5/8-18, 1.75, 0.89, 0.30,

4739-6B Aeroquip by Danfoss | Male SAE 45° Socketless Reusable Hose Fitting | -06 Male SAE 45° x -06 Push-On Hose Barb | Brass

SAE 45 Degree Flared Tube Fittings